TMJ14 I2c Spi Output Compensated Piezoresistive OEM Pressure Sensor

Applications of Pressure Sensor

·Gas, liquid pressure measurement

·Industrial process control

·Level measurement

·Gas, liquid pressure measurement

·Pressure checking meter

·Pressure calibrator

·Liquid pressure system and switch

·Cooling equipment and air conditioning system

·Aviation and navigation inspection

Introduction of Pressure Sensor

TMJ14 pressure sensor is piezoresistive silicon pressure sensor with isolated construction and precise high low temperaure compensation, build-in high stable silicon chip, stainless steel 316L housing.

Design concept base on wheatstone bridge principle, the measured pressure cause resistance bridge value variation, then it converted to ratiometric mV signal.

Availability:

Quantity:



Inquire

Model:
TMJ14
Brand:
NS

Product Description

Pressure Sensor electric specification

Power supply: 1.5mA or 5VDC

Electric connection: Kovar pin, or silicon rubber wire (PCB potting availble)

Input impedance: 2kΩ~4kΩ

Output impedance: 4kΩ~6kΩ

Response (10%~90%):<1ms

Insulation resistor: 100MΩ, 250VDC

Overpressure: 2 times FS

Pressure Sensor construction

Diaphragm: stainless steel 316L

Housing: stainless steel 316L

Specifications	Technical data
Measuring range	3 5 10 20 40 60 MPa
Power supply	5 VDC or Idd=1.5 mA
Bridge resistance	3~6 KΩ
Zero output (type)	<±2 (Idd=1.5 mA)
Full scale output	40 mV(Min)
Comprehensive accuracy(type)	±0.25 %F.S.
Zero temperature drift(type)	±0.02 %F.S.
Sensitivity temperature drift(type)	±0.02 %F.S.
Operating temperature range (type)	-40~+125 ºC
Storage temperature range (type)	-40~+125 ºC
Fluid temperature range (type)	-40~+125 ºC
Insulation resistance	≥100(250VDC)
Vibration proof	20...2000 Hz amax=10 g
Response time	≤1(10~90%F.S.) ms
Material	Special features of Pressure Sensor ·Wet parts and sealing apply stainless steel welding realize an excellent anti corrosion ·Gauge, Sealed Gauge ·5VDC or Idd=1.5mA excitation ·Output ratiometric mV signal, customized I2C or SPI Output ·PCB potting is optional ·Silicon oil filling sensor element Pressure Sensor electric specification Power supply: 1.5mA or 5VDC Electric connection: Kovar pin, or silicon rubber wire (PCB potting availble) Input impedance: 2kΩ~4kΩ Output impedance: 4kΩ~6kΩ Response (10%~90%):<1ms Insulation resistor: 100MΩ, 250VDC Overpressure: 2 times FS Pressure Sensor construction Diaphragm: stainless steel 316L Housing: stainless steel 316L Stainless steel 316L