You are here: Home » News
  • 2021-11-30

    Choose the Right Measuring Range in Pressure Sensors

    It’s difficult to obtain an ideal accuracy if choosing range is not matched actual situation. For example, we don’t suggest use a 1000bar range of pressure sensor on measuring 1bar pressure, it would be better if you could use 10bar range instead of 1000bar. Therefore, choosing the right measurement range​ is very important and efficient for you. Three major factors must to be taken into account:

  • 2021-11-15

    The Parameters of Pressure Sensors

    ① Operating Pressure Range: Pressure measuring range the sensor can be safely operated. ② Operating Mode: Absolute pressure, or gauge pressure ③ Maximum Pressure or Burst Pressure: The maximum value of pressure that can be withstood by the sensor without damaging itself. If the applied pressure is more than this maximum pressure value, it might result in device failure or inaccurate signal output, even damage the sensor itself, which named burst pressure. ④ Output Type: It could be Ratio-metric mV, 4~20mA, 0.5Vdc~4.5Vdc, 0~5Vdc, 0~10Vdc, digital I2C and digital SPI. ⑤ Full Scale: Maximum pressure that the sensor can measure from zero pressure. ⑥ Operating Temperature Range: The temperature range the sensor can operate reliably and provide an accurate output signal.

  • 2021-10-29

    Output Types of Pressure Sensors

    Output types of pressure sensors include the following four types: ① Ratiometric Millivolt Output(mV): Pressure sensor with ratiometric millivolt output are widely used in many applications because of their cost-effective nature. The full scale output of a millivolt sensor is from 40mV(Min.)to 120mV(Max.); 70mV (Typ.) under power of 5VDC or Idd=1.5mA. The output is directly proportional to the excitation power. ② Current Loop Output(4~20mA): These are pressure sensors with a current output of 4-20 mA. Since this kind of signal outputs are not much affected by electrical noise, the signals can be transmitted over a long distance. ③ Analog Voltage Output(Vdc). These are pressure sensors with a voltage output of 0.5~4.5Vdc, 0~5Vdc, and 0~10Vdc etc, which could be easily read by PCL, controller or indicator. ④ Digital output: The output signal in the case of a digital signal of I2C, SPI with digital code for pressure output values.

  • 2021-10-15

    How to choose a temperature sensor

    When selecting a temperature sensor, please take seven key considerations in mind for selecting the best position sensor for your application 1. Measuring Method: PT100, PT1000 etc 2. Temperature Range 3. Accuracy 4. Mechanical Connection 5. Probe Length 6. Probe Diameter 7. Output Signal

  • 2021-09-30

    How to choose a position sensor

    When selecting a pressure sensor, please take seven key considerations in mind for selecting the best position sensor for your application: 1) The type of movement being measured: linear displacement, or rotary displacement 2) Sensor Mounting 3) Accuracy 4) Shock and Vibration 5) Surrounding Temperature Conditions 6) IP Class 7) Output signal

  • 2021-09-15

    How to choose a pressure sensor

    1. Application and measurement type. Common type of pressure measurement include: Absolute, gauge, differential, vacuum, bidirectional, and sealed gage. 2. Pressure range. kPa, Bar,Psi, Mpa 3. Process media. Water, Oil, Gas etc 4. Temperature range and installation environment. -30~80℃ etc. 5. Accuracy. ±0.25%F.S. 6. Output. 4~20mA, mV, 0.5~4.5Vdc etc ​

  • 2021-08-31

    How to choose a load cell

    How to choose a load cell 1. Consider the load input direction. 2. Consider the object to be weighed: capacity, resolution, shape. 3. Consider the environment the Load Cell will operate in. 4. Consider the desired accuracy, error ratings, and ease of calibration. 5. Select the load cell type for the application.

  • 2021-08-16

    Sputtering thin-film sensor (resistive pressure measurement)

    The base body is made of stainless steel. The resistance structure is produced by photolithography. Thin-film measuring cells stand out due to their excellent resistance to pressure peaks and bursting pressure.

  • 2021-07-30

    Isolated pressure measuring cell

    Electronic pressure measurement requires a sensor that records the pressure to be measured and converts it into an electrical signal. Due to the large output signals and the established manufacturing processes, as well as the many years of experience gained, piezoresistive technology has become established in pressure measurement.

  • 2021-07-15

    High Temperature Pressure Transducers

    Transducers generally convert energy from one form to another, although the energy is typically a signal. They are routinely used in automated systems, which are often controlled by measurements of physical quantities such as force, motion, temperature and pressure. A sensor is a specific type of transducer that senses a physical property of its environment and reports that change, typically in the form of an electrical signal. For example, a pressure sensor detects pressure and reports it to a gauge that displays the pressure.

  • Total 8 pages  Go to Page
  • Go