NS-2 4 Wires Mv Ratiometric Output Flush Diaphragm Pressure Transmitter Smail-size Smaill size sensor tiny sensor

You are here: Home » Products » Pressure Sensor » NS-2 4 Wires Mv Ratiometric Output Flush Diaphragm Pressure Transmitter Smail-size Smaill size sensor tiny sensor

NS-B 4 Wires Mv Ratiometric Output Flush Diaphragm Pressure Transmitter Smail-size Smaill size sensor tiny sensor

Share to:

NS-2 4 Wires Mv Ratiometric Output Flush Diaphragm Pressure Transmitter Smail-size Smaill size sensor tiny sensor

Introduction of Pressure Transducer

NS-2 series pressure transducer made by TM's own pressure sensor core as sensor sensitive element. Pressure transducer can be transferred liquid or gas pressure into ratiometric mV signal. Pressure transducer is produced by build-in a piezoresistive pressure sensor into stainless steel housing with pressure ports. the product is an electronic device that convert a physical variable (pressure) into an electrical signal(current or voltage) that can be read or acquired by various control, measurement and adjustment devices. The sensor applies laser trimming hybrid compensates transducer zero, span and so on, is widely used for pressure calibration device, auto mobile, plastic and rubber injection presses, presses and metal working machinery , industrial measurement, and HVAC.

Availability:

Quantity:



Inquire

Model:
NS-2
Brand:
NS

Product Description

Applications of Pressure Transmitter

·Plastic and rubber injection presses

·Presses and metal working machinery

·Automatic testing system

·Test Equipment

·Pneumatic system

Introduction of Pressure Transducer

NS-2 series pressure transducer made by TM's own pressure sensor core as sensor sensitive element. Pressure transducer can be transferred liquid or gas pressure into ratiometric mV signal. Pressure transducer is produced by build-in a piezoresistive pressure sensor into stainless steel housing with pressure ports. the product is an electronic device that convert a physical variable (pressure) into an electrical signal(current or voltage) that can be read or acquired by various control, measurement and adjustment devices. The sensor applies laser trimming hybrid compensates transducer zero, span and so on, is widely used for pressure calibration device, auto mobile, plastic and rubber injection presses, presses and metal working machinery , industrial measurement, and HVAC.

Special features of Pressure Transducer

·Wetted parts apply stainless steel ensure excellent corrosion resitance

·Output: mV

·Build-in silicon oil filling sensor core

·Wetted parts: SUS304, SUS316

Pressure Transducer electric specification

Power supply: 5VDC or 10VDC

Electric connection: 4 pin flying lead or M12×1- 4 pole male

Output signal: mV

Response (10%~90%):<1ms

Insulation resistor: 100MΩ,500VDC

Overpressure: 2 times FS

Pressure Transducer construction

Diaphragm: stainless steel 316L

Housing: stainless steel 304

Specifications	Technical data
Measuring range	-100kPa 1.0 1.6 3.0 10 20 40 60 80 100 MPa
Overload pressure	200%F.S. 150%F.S.
Burst pressure	300%F.S. 200%F.S.
Operational mode	Gauge, Absolute
Measuring media	compatible with stainless steel
Output signal	mV
Operation voltage	5VDC or 10VDC
Accuracy	±0.1%F.S(Min.) ±0.5%F.S(Max.)
Long-term drift(type)	<±0.2(type) %F.S./Year
Compenstated temperature range (type)	-20~+80 ºC
Operating temperature range (type)	-30~+80 ºC
Storage temperature range (type)	-40~+120 ºC
Fluid temperature range (type)	-30~+120 ºC
Insulation resistance	≥100MΩ(500VDC)
Vibration resistance	IEC 60068-2-6(5...2000Hz, 20g)
Shock resistance	IEC 60068-2-27(50g, 11ms)
EMC proof	IEC 61000-6-2/3/4
Material	Stainless steel 304
Mechanical connection	G1/4A, M12×1 etc.
IP protection	IP 65