Draw-Wire Displacement Sensor_Draw-Wire Displacement Sensor_Shanghai TM Automation Instruments Co.,Ltd.

Home Products Sensor Displacement Sensor Draw-Wire Displacement Sensor

NS-WY10

NS-WY10
Draw-Wire Displacement Sensor

high accuracy, Overall Accuracyup to0. 05% F. S

goodgoodvibration resistanceandshock resistance

Protection Rating: IP65

Analog output: 0~5V, 0~10V, 4~20mA, potentiometer, encoder

Used inaviation, Automationproduction line, bridge and tunnel engineering, engineering vehiclesfields

Draw-Wire Displacement Sensor

Technical Parameters
SpecificationsTechnical Data
Stroke length0. . . 100mmto0. . . 3000mm
Comprehensiveaccuracy0.05%F.S、0.1%F.S、0.25%F.S
Repeatability0.005mm
Outputwire2wires/3wires
Output signal

potentiometer: Max10kΩ 

Voltage: 0~5V, 0~10V, 0~±5V, 0~±10V

current: 4~20mA 

encoderOutput

Operating voltage24VDC (12~32VDC)
Storage temperature range-20℃~85℃
Operating temperature range-40℃~120℃
Vibration proof10g(1Hz-2kHz)with reference toEN60068-2-6
Strike proof50g/6mswith reference toEN60068-2-27
Displacmentspeed≤0.5m/s
MaterialAluminum Alloy   Aluminium alloy
Electrical connectionDirect Cable/M12×1   4- pole male       M16×1   4-pole male
Ip protectionIP65(signalconnectorcorrectly assembledandconnection: )


Outline Dimension Drawing

拉线式位移传感器(图1)

Selection Table

WY10选型.png

Fill in the information to obtain the materials
Name
Email
Telephone
Company