You are here: Home » News
  • 2020-03-31

    What is a Position Sensor?

    A position sensor is any device used for measuring the distance traveled by a body starting from its reference position. It measures linear or angular position in reference to a fixed point or arbitrary reference.

  • 2020-03-20

    Gauge Pressure Sensors

    This section illustrates our range of gauge pressure sensors that can be used to measure pressure referenced to ambient atmospheric pressure.

  • 2020-02-27

    What is a Position Sensor?

    A Position sensor is any type of device which detects the movement of a chosen object in either a Linear or Rotary motion and converts the movement into output signals which are suitable for processing, transmission or control depending on the application.

  • 2020-02-13

    Types of pressure measurements

    Types of pressure measurements

  • 2020-01-20


    DISPLACEMENT SENSOR APPLICATIONS Machine automation - these are extreme environments so the sensor must have the correct sealing to be suitable.

  • 2019-12-25

    Technical term for load cell(Part 4)

    ① Repeatability: The maximum difference between load cell output readings for repeated loadings under identical loading and environmental conditions. ② Resolution: The smallest change in mechanical input which produces a change in the output signal. ③ Sensitivity : The ratio of the change in output to the mechanical input.

  • 2019-12-19

    Technical term for load cell(Part 3)

    ① Load Cell: A device which produces an output signal proportional to the applied weight or force. ② Natural Frequency: The frequency of free oscillations under no--load load conditions. ③ Nonlinearity: The maximum deviation of the calibration curve from a straight line drawn between the no--load an

  • 2019-11-29

    Technical term for load cell(Part 2)

    ① Creep Recovery The change in no--load output occurring with time after removal of A load which had been applied for a specific period of time. Usually measured over a specific time period immediately following removal of rated load and expressed as a percent of rated output over a specific period of time. ② Deflection The change of length along the primary axis of the load cell between no--load and rated load conditions. ③ Drift A random change in output under constant load conditions.

  • 2019-11-15

    Technical term for load cell(Part 1)

    ① Ambient Conditions Humidity, pressure, temperature, etc. of the medium surrounding the load cell. ② Ambient Temperature The temperature of the medium surrounding the load cell. ③ Angular Load Eccentric A load applied eccentric with the primary axis at the point of application and at some angle with respect to the primary axis.

  • 2019-10-30

    Application of wire displacement sensor

    Application of wire displacement sensor Wire displacement sensor is a new type of distance sensor developed by principle using linear sensor. It consists of a potentiometer, a control circuit and a group of mechanical components.

  • Total 8 pages  Go to Page
  • Go