 |
| Quantity: | |
|---|---|
Applications of Load Cell
·Scale manufacturers (platform scales, legal-for-trade scales)
·Medicine (weighing hospital patients)
·Building industry (weighing materials, power shovels)
·Agriculture (automatic feeders)
·Public sector (weighing garbage)
·Quality assurance
Introduction of Load Cell
The compact and cost-effective TH3 force sensor reliably measures compressive force where space is a constraint. The force transducer allows for both dynamic and static measurement tasks to be solved. Due to the high fundamental frequency, TH3 is also suitable for very fast measurements. Its welded design from stainless steel makes the force sensor extremely robust.
Special features of Load Cell
·Spoke type, low profile
·High precision, overload protection, excellent stability
·Dynamic measurement
·Strong off center loading or side loading avoided
·Easy for installation and use
Load Cell electric specification
Power supply: 5~24VDC
Various optional output signal: 2.0mV/V, (if connect with amplifier, 4~20mA, 0~5V, 0~10V etc)
Input resistance: 380±10Ω
Output resistance: 350±3Ω
Insulation resistance: 2000MΩ
Load Cell construction
Alloy steel
| Specifications | Technical data |
Rated capacity | 0.5 1 3 5 10 20 30 100t |
| Output sensitivity | 2.0±0.002 mV/V |
| Non-linearity | ≤±0.05 %F.S. |
| Hystersis | ≤±0.05 %F.S. |
| Repeatability | ≤±0.05 %F.S. |
| Creep | ±0.03 %F.S./30min |
| Temperature effect on output | ±0.03 %F.S./10℃ |
| Temperature effect on zero | ±0.05 %F.S./10℃ |
| Zero output | ＜±1 %F.S. |
| Insulation resistance | ≥2000MΩ |
| Operating temperature range | -25~+70 ℃ |
| Safe overload | 150 %F.S |
| Ultimate overload | 300 %F.S |
| Recommended excitation voltage(without amplifier) | 5~12 Vdc |
| Maximum excitation voltage(without amplifier) | 18 Vdc |
| Material | Alloy steel |
| IP protection | IP65 |
Applications of Load Cell
·Scale manufacturers (platform scales, legal-for-trade scales)
·Medicine (weighing hospital patients)
·Building industry (weighing materials, power shovels)
·Agriculture (automatic feeders)
·Public sector (weighing garbage)
·Quality assurance
Introduction of Load Cell
The compact and cost-effective TH3 force sensor reliably measures compressive force where space is a constraint. The force transducer allows for both dynamic and static measurement tasks to be solved. Due to the high fundamental frequency, TH3 is also suitable for very fast measurements. Its welded design from stainless steel makes the force sensor extremely robust.
Special features of Load Cell
·Spoke type, low profile
·High precision, overload protection, excellent stability
·Dynamic measurement
·Strong off center loading or side loading avoided
·Easy for installation and use
Load Cell electric specification
Power supply: 5~24VDC
Various optional output signal: 2.0mV/V, (if connect with amplifier, 4~20mA, 0~5V, 0~10V etc)
Input resistance: 380±10Ω
Output resistance: 350±3Ω
Insulation resistance: 2000MΩ
Load Cell construction
Alloy steel
| Specifications | Technical data |
Rated capacity | 0.5 1 3 5 10 20 30 100t |
| Output sensitivity | 2.0±0.002 mV/V |
| Non-linearity | ≤±0.05 %F.S. |
| Hystersis | ≤±0.05 %F.S. |
| Repeatability | ≤±0.05 %F.S. |
| Creep | ±0.03 %F.S./30min |
| Temperature effect on output | ±0.03 %F.S./10℃ |
| Temperature effect on zero | ±0.05 %F.S./10℃ |
| Zero output | ＜±1 %F.S. |
| Insulation resistance | ≥2000MΩ |
| Operating temperature range | -25~+70 ℃ |
| Safe overload | 150 %F.S |
| Ultimate overload | 300 %F.S |
| Recommended excitation voltage(without amplifier) | 5~12 Vdc |
| Maximum excitation voltage(without amplifier) | 18 Vdc |
| Material | Alloy steel |
| IP protection | IP65 |
